Supercritical methanol for polyethylene terephthalate depolymerization: observation using simulator

To apply PET depolymerization in supercritical methanol to commercial recycling, the benefits of supercritical methanol usage in PET depolymerization was investigated from the viewpoint of the reaction rate and energy demands. PET was depolymerized in a batch reactor at 573 K in supercritical methanol under 14.7 MPa and in vapor methanol under 0.98 MPa in our previous work. The main products of both reactions were the PET monomers of dimethyl terephthalate (DMT) and ethylene glycol (EG). The rate of PET depolymerization in supercritical methanol was faster than that of PET depolymerization in vapor methanol. This indicates supercritical fluid is beneficial in reducing reaction time without the use of a catalyst. We depicted the simple process flow of PET depolymerization in supercritical methanol and in vapor methanol, and by simulation evaluated the total heat demand of each process. In this simulation, bis-hydroxyethyl terephthalate (BHET) was used as a model component of PET. The total heat demand of PET depolymerization in supercritical methanol was 2.35 x 10(6)kJ/kmol Produced-DMT. That of PET depolymerization in vapor methanol was 2.84 x 10(6)kJ/kmol Produced-DMT. The smaller total heat demand of PET depolymerization in supercritical methanol clearly reveals the advantage of using supercritical fluid in terms of energy savings.     

Finite element analysis of knee injury risks in car-to-pedestrian impacts

In vehicle-pedestrian collisions, lower extremities of pedestrians are frequently injured by vehicle front structures. In this study, a finite element (FE) model of THUMS (total human model for safety) was modified in order to assess injuries to a pedestrian lower extremity. Dynamic impact responses of the knee joint of the FE model were validated on the basis of data from the literature. Since in real-world accidents, the vehicle bumper can impact the lower extremities in various situations, the relations between lower extremity injury risk and impact conditions, such as between impact location, angle, and impactor stiffness, were analyzed. The FE simulation demonstrated that the motion of the lower extremity may be classified into a contact effect of the impactor and an inertia effect from a thigh or leg. In the contact phase, the stress of the bone is high in the area contacted by the impactor, which can cause fracture. Thus, in this phase the impactor stiffness affects the fracture risk of bone. In the inertia phase, the behavior of the lower extremity depends on the impact locations and angles, and the knee ligament forces become high according to the lower extremity behavior. The force of the collateral ligament is high compared with other knee ligaments, due to knee valgus motions in vehicle-pedestrian collisions.     

Pesticide residues in soils, sediments, and vegetables in the Red River Delta, northern Vietnam

This study assessed pesticide residues in soils, sediments, and vegetables in the Xuan Khe and Hop Ly communes located along the Chau Giang River in the Red River Delta, northern Vietnam. Samples were collected from agricultural areas within and outside of embankments built to prevent flooding. In Xuan Khe, the soils outside of the embankment were more clayey with higher organic matter contents compared with the inside, due to selective deposition during river flooding. Many of the soils contained significant amounts of pesticides including dichlorodiphenyltrichloroethane (DDT), dicofol, isoprothiolane, and metalaxyl although their levels were below the maximum allowable concentration set by the Vietnamese government. The spectrum of DDT derivatives found suggested that the source of DDTs was not contaminated dicofol. Soils in Hop Ly resembled soils in Xuan Khe but were relatively sandy; one field showed appreciable contents of DDT derivatives. The ratios of (p,p ^′-dichlorodiphenyldichloroethylene + p,p ^′-dichlorodiphenyldichloroethane)/∑DDT in the surface and subsurface soils in Hop Ly were 0.34 and 0.57, suggesting that the DDTs originated from recent application. Pesticide residues in soils were not likely to translocate into vegetable crops, except for metalaxyl. High concentrations of cypermethrins in kohlrabi leaves could be ascribed to foliar deposition.     

Sperm competition promotes diversity of sperm bundles in <Emphasis Type="Italic">Ohomopterus</Emphasis> ground beetles

Diversification of sperm morphology has been investigated in the context of sperm competition, but the adaptive significance of sperm bundles is still unclear. In analyzing 10 taxa of the genus Carabus subgenus Ohomopterus and one related Carabus ground beetles, we found that dimorphic sperm bundles occurred in most species with varied degrees of bimodality, whereas sperm were generally monomorphic. Comparative analyses with phylogenetically independent contrasts revealed that the sizes of large and small sperm bundles evolved more rapidly than, and were not correlated with, the length of sperm, suggesting more intense selection on sperm bundle sizes and their independent responses to different evolutionary forces. The size of large sperm bundles was positively correlated with male genital morphology (pertinent to displacement of rival spermatophores) and postcopulatory guarding duration as well as male body length, suggesting that larger sperm bundles have been favored when the risk of spermatophore displacement is high. Larger sperm bundles may be advantageous because of their ability to migrate more rapidly into the spermatheca. In contrast, no clear association was detected between the small sperm bundle size and mating traits despite its rapid diversification. The present study provides the first record of heteromorphic sperm bundles, the diversity of which may be promoted by sperm competition.     

Dissolution of polystyrene into cyclic monoterpenes present in tree essential oils

We examined dissolution of polystyrene (PS) into cyclic monoterpenes present in tree essential oils, in order to develop an environmentally friendly shrinking agent for expanded polystyrene. The relationship between the chemical structure of the monoterpenes and their dissolution power for PS was studied through the solubility parameter (δ) and apparent activation energy (E _a) for dissolution. (R)-Limonene and its structural isomers on a C=C bond have high solvent power for PS. This favorable solubility was explained by their solubility parameters. The occurrence of hydroxyl group in a solvent molecule, such as in terpinen-4-ol, reduced affinity for PS. Bicyclic monoterpenes and 1,8-cineole, which have sterically bulky structure, showed limited dissolution power even though they have solubility parameters similar to that of (R)-limonene. Their bulky structures would interfere with permeation of solvent into the PS matrix. Cyclic monoterpenes and PS were recovered almost quantitatively by simple steam distillation of the PS solution.     

Soil characteristics under cash crop farming in upland areas of Sarawak,Malaysia

This study discusses soil fertility under perennial cash crop farming (para rubber, Hevea brasiliensis; black pepper, Piper nigrum; oil palm, Elaeis guineensis) conducted by local farmers and an oil palm estate in an upland area of Sarawak, Malaysia, in comparison with the surrounding secondary forests. In the farmlands of the local farmers, rubber farming was conducted without fertilizer application, while 2–5 t ha^?1 of NPK compounds were applied annually on pepper farms. Soils under rubber farming were acidic with poor nutrient contents, resembling soils in secondary forests. In pepper farms, soils were less acidic and showed high nutrient contents, especially with respect to available P and exchangeable Ca. This trend became stronger with increasing farming duration. Fertilizers applied around pepper vines appeared to migrate and spread across the fields. Bulk density and hardness of surface soils were higher in pepper farms than in secondary forests, indicating soil compaction due to field works. In the oil palm estate, annual fertilizer application rates were moderate at 0.4–0.8 t ha^?1 of NPK compound fertilizers. However, the soil properties in the oil palm estate were similar to those of the small-scale pepper farms. Close to the bases of the palms where fertilizers usually are applied, the contents of exchangeable Ca and available P were high. Nutrient uptake by the dense root systems of the palms seemed to prevent excessive loss of nutrients through leaching. Loss of soil organic matter and deterioration of soil physical properties were brought about by terrace bench construction, but the soils seemed to recover to some extent over time. In conclusion, technologies such as intercropping and the appropriate allocation of different crops to specific locations as well as the proper selection and dosage of fertilizers should be developed and adopted to improve fertilizer efficiency and prevent water pollution due to fertilizer wash-off from farmlands.     

Social development benefits of hydroelectricity CDM projects in Brazil

In recent years, the concept of sustainable development (SD) has become increasingly recognized and important. Within organizations, SD is often portrayed as a balancing act and requires a combination of three elements to be considered: economy, environment, and society. Traditionally, organizational management research has been focused on economical and environmental fronts. However, social aspects are also important for organizations, especially those in emerging and developing countries. The goal of this article is to investigate the potential of Clean Development Mechanism (CDM) projects to deliver social benefits in Brazil’s hydroelectricity sector. The investigation involved the assessment of 46 registered hydro CDM projects under the Kyoto Protocol in terms of their potential impact on the envisaged social development goals. Two case studies were also examined. Results indicate that organizations managing hydroelectric initiatives in Brazil can provide the pathway toward achieving a number of important social benefits. Successful projects were found to have good community involvement and were managed by both cooperative ventures and money-making corporations. The research also identified several challenges that are hindering hydro CDM projects from delivering more social benefits and enabled a number of recommendations to be extracted for the organizations facing these challenges.     

Removal of estrogens by electrochemical oxidation process

Treatments of estrogens such as Estrone(E1), Estradiol(E2) and Ethinylestradiol(EE2) were conducted using an electrolytic reactor equipped with multi-packed granular glassy carbon electrodes.Experimental results showed that E1, E2 and EE2 were oxidized in the range of 0.45–0.85 V and were removed through electro-polymerization. Observed data from continuous experiments were in good agreement with calculated results by a mathematical model constructed based on mass transfer limitation. In continuous treatment of trace estrogens(1 μg/L), 98% of E1, E2 and EE2 were stably removed. At high loading rate(100 μg/L), removal efficiency of E1 was kept around 74%–88% for21 days, but removal efficiency reduced due to passivation of electrodes. However, removal efficiency was recovered after electrochemical regeneration of electrodes in presence of ozone. Electric energy consumption was observed in the range of 1–2 Wh/m3. From these results, we concluded that the present electrochemical process would be an alternative removal of estrogens.     

A comparison of five rapid direct toxicity assessment methods to determine toxicity of pollutants to activated sludge

Five rapid direct toxicity assessment methods were used in three European partner countries to determine the toxicity of single toxicants, mixed toxicants and real industrial wastes. The final aim was to protect microbial degradation of organic wastes in biological treatment processes and hence enhance the quality of treated effluents to be discharged to the environment. Nitrification inhibition, Respirometry, Adenosine triphosphate luminescence and Enzyme inhibition were tested utilising activated sludge as the testing matrix. The Vibrio fischeri toxicity test was used as a surrogate to compare the various microbial bioassays. The IC50 (toxicant concentration eliciting a 50% inhibitory effect) was determined for a number of pollutants including single toxicants Cd, Cr, Cu, Zn, 3,5-dichlorophenol, toluene and linear alkylbenzenesulphonate (LAS); a standard mixture of metals and LAS; a standard mixture of organics and LAS, and 16 industrial effluents. The V. fischeri bioassay was also chosen in order to assess quality control of toxicant preparation during testing in the different laboratories of the partner countries. Comparisons of sensitivity, cost of implementation, cost per test, relevance, and ease of use were made. The most sensitive bioassays were V. fischeri and Nitrification inhibition, however, this depended in the main on the pollutant and mixtures tested. It is recommended that during assessment of wastewater toxicity a suite of tests be used rather than reliance on one particular test.